Power-based Fitness Testing

Measuring a cyclist’s power output is the most direct and objective measurement of cycling performance. Determining a cyclist’s maximum sustainable power for a particular period of time is the most effective way to measure, monitor, and assess cycling fitness, training, and pacing.

Riders will use either the CycleOps 400 Indoor Cycle set up to your own measurements, or their own bike on a computrainer.

Data collected will be power output, heart rate, and rate of perceived effort. There is no need for uncomfortable gas masks or drawing of blood.  Maximum sustainable power output = Straightforward testing of cycling fitness and performance; Smart Training by M2.

Preparing for a Power Performance Test

Your Power Test will be a hard riding effort and where you will want to bring good legs. To that end, you should not ride or run long or hard within 2 days of your test.

You should bring that bike which you ride the most. We will also take your measurements so that you can set-up the CycleOps Indoor Cycle exactly as your road/tri/cyclocross bike should you participate in our power-based indoor cycling classes.

The test and consultation will take approximately 1.25 hours.  Post-test consultation will discuss your training zones, expected improvement, and how to apply the results to your everyday training.

Power Performance Test & Training Consultation : $125

 

Pedal Stroke Analysis

Pedal Stroke Analysis provides provides a rider with a detailed analysis of power production within the pedal stroke, and for each leg.

We use CompuTrainer’s SpinScan™ tool to provide a multi-color torque graph which represents one full 360° pedal revolution divided into 15° segments. Our use of Spinscan allows us to identify “flat” or “dead spots” in the pedal stroke where the cyclist is not effectively transferring power to the drivetrain.

Color-coded Bar-Graphs show instantaneous right/left leg power split and where power is being applied for greater aid in development of under-utilized muscle groups.

SpinScan graphs from RacerMate

The test will be performed using your own bicycle. We will also take your measurements so that you can set-up the CycleOps Indoor Cycle exactly as your road/tri/cyclocross bike should you participate in our power-based indoor cycling classes.

 

Pedal Stroke Analysis and Consultation : $125

 

Private Rides with M2 - Take to the roads with M2!

This one-on-one private bike ride will last up to two hours. M2 will analyze all elements of your riding and provide in-the-moment training. The ride is customized to your exacting needs, whether bike-handling, drafting, using the power meter, learning structured intervals or even if you just need a push.

Note: Private rides can be shared, please contact us for more details.

Cost: $200 per session

 

Training Consultations

Consultations are best described as any additional advice or guidance scheduled as a one-one-one with M2.

Some typical uses of consultation time are:
• Re-evaluation of performance testing
• Specific skill or drill advice on bike, on road or in pool
• One-to-one coaching advice about issues or obstacles in training
• Training plan advice

Cost: $100 per 60-minute session